Downrigger Diversity Improves Your Success

Downrigger Diversity Improves Your Success

By Wisconsin fishing charter Capt. Jim Hirt
Let’s continue with downriggers. In the last article we covered the hardware, weights, releases and manual or electric models. Now we will go into using this tool in many ways. Should you have a question please e-mail me from my Website contact us page. Read all my articles and see video fish reports at http://www.jimhirt.com

The basic presentation

The basic presentation is to set the lead by allowing the lure to trail behind the boat as the boat goes anywhere from 1 to 3.5 miles per hour. The distance the lure is run behind the weight of the downrigger will change depending on a large and ever changing set of conditions.

Length will change

At or before first light of the day, and again after sunset a short lead of 20 feet is the most effective. The commotion of many lures running side by side will draw fish to the boat. As the sun comes up and the bite slows down, you should consider increasing the distance from the weight to the lure.

Environmental Issues VS Lead Length

Zebra and Quagga mussels have taken much of the color out of the water on and a long lead is required for spooky fish on sunny calm days. This is very important when you are working the top forty feet of water. The short lead is also very good when fishing deeper than 75 feet down. There are lures that must be run shorter than 20 feet to work. Rotators, flashers and dodgers like to run 12 to 15 feet behind the weight.

SWR or ?

SWR is another presentation to run on a downrigger. SWR or secret weapon rig is a rod with two or three colors of leadcore line. The advantage to this set up is it runs below the weight to offer a lure in an environment 100 feet behind the boat.
Down & Outs

For many years some fisherman have been using down and outs. This is a small diving disc adjusted to run to the left or right of the boats path to provoke a hit. Set up the disc as you would for working it on a solo line and attach it 20 feet behind the weight.

Sliders Explained

In addition to the standard rigging, sliders are a popular method of getting more lines in the water. After the main line is set to any depth a six foot piece of monofilament with a lure on one end and a snap on the other is attached to the main line and allowed to slide down to about midway from the surface and the bottom lure.

Stacking Lines

With a downrigger you can also run a stack line to offer more lures at more potential depths. The way this is rigged is to set your main line as usual lower it to 15 feet and add another line by means of an additional release. My experience with this has been outstanding. Two lures together are very effective when working deep lines. I like a dodger or flasher 10 feet behind the weight on the bottom line and a spoon 30 feet back on the top stack line.
Use your imagination, The variations of downrigger presentation are end less.

Buy Four And Get One Free

Badger Tackle has a promotion for a free spoon. Call me anytime to help with your spoon selection. If you would like to try the hottest spoons for salmon and trout for shore anglers or trolling and jigging in 2011 go to http://www.badgertackle.com Good luck. Jim charters out of Milwaukee, WI. with Blue Max Charters. He can be reached at 414-828-1094 or visit his web site at http://www.bluemaxcharters.com Copyright© 2012, James J. Hirt, All Rights Reserved.

Fishing Downriggers 101

Fishing Downriggers 101

By Wisconsin fishing charter Capt. Jim Hirt
Now is the time to think about changes to make you more productive this season. There are many ways to go on this subject. Over the next several articles I will try to cover topics like rigging, tackle and presentation. My goal is to provide information, which should lead to more fish and less slow fishing. Should you have a question please e-mail me from my Website contact us page. Read all my articles and see video fish reports at http://www.jimhirt.com

Let’s get started with rigging.

This is a very large topic that needs to be broken down into smaller subjects. Downriggers are a good place to start. This is one of the most basic of presentations and yet is very easy to get confused about. The use of this tool is limited only by your imagination. For every method I write about here some of you know dozens of other ways to work a downrigger.

Basic downriggers

The basic concept is a wire line with a weight on one end with a release to hold a lure at a given depth. The other end is a spool or wheel to hold the wire and facilitate the raising or lowering of the weight. Downriggers are made in manual or electric. There are many brands out in the market place and I think they are all good.

Electric and manual options

The high-speed electrics will give you an advantage when you are on a hot bite. For the average fisherman manuals will get the job done. There are all kinds of additional features you can add to your downrigger. An important one is temperature at the ball to tell you when your lure is in the temp for your target. This can also be added to any downrigger later. Cameras to watch lure action and the attitude of the fish. All the extras may or may not get you more fish depending on your ability to interpret the information provided.

Setup and tune up

Basic set up is to let out your fishing spoon behind the boat and attach it to the weight. The way you attach it has everything to do with how many fish you will put in the boat. I have tried most of the different styles of releases. I like the Blacks release with the clip to attach the weight as one unit. The Blacks releases are completely adjustable to set the hook when the fish bites and never tangle or wear the line.

Weight selection is also important

Things to consider are size, shape, construction and color. For my corner downriggers a flat weight called a pancake with a large adjustable fin is the way to go. When the fin is correctly tuned it will spread your presentation and avoid tangles. For the two inside downriggers I prefer a weight that tracks well and looks like a fish.

How heavy?

I use 10-12 pound weights when fishing deep over 100 feet and go to 8 pounds for shallow presentation. Attach the weight to the cable with a Clincher. This plastic termination for the end of the cable allow you to attach a snap for the ball without crimps. The clincher or similar types will save cable fatigue and lost downrigger weights. I will finish on this subject in the next article.

Buy Four And Get One Free

Badger Tackle has a promotion for a free spoon. Call me anytime to help with your spoon selection. If you would like to try the hottest spoons for salmon and trout for shore anglers or trolling and jigging in 2011 go to http://www.badgertackle.com Good luck. Jim charters out of Milwaukee, WI. with Blue Max Charters. He can be reached at 414-828-1094 or visit his web site at http://www.bluemaxcharters.com Copyright© 2012, James J. Hirt, All Rights Reserved.